Lenovo Tab M10 Plus (3rd Gen) Firehose Loader (TB125FU/TB128X) – Download

Revive your tablet. Download the official Lenovo Tab M10 Plus (3rd Gen) Firehose Loader. This specialized Snapdragon 680 programmer allows unbricking models TB125FU and TB128X via EDL mode.

The Lenovo Tab M10 Plus (3rd Gen) (Models: TB125FU, TB128X, TB128FU) is a popular tablet powered by the Qualcomm Snapdragon 680 (SM6225) processor. While robust, incorrect flashing, failed OTA updates, or software corruption can lead to a “Hard Brick,” where the device is only detected as Qualcomm HS-USB QDLoader 9008. To revive it, you need the specific Firehose Loader (Programmer) file tailored for the SM6225 platform.

File Information & Specs

Supported Tools

Standard free tools may not fully support this secure boot loader. It is recommended to use updated professional service tools:

• UnlockTool (Recommended – Select ‘Lenovo Tab M10 Plus Gen 3’)
• LMSA (Lenovo Moto Smart Assistant) (Official Tool)
• Chimera Tool
• UMT (Ultimate Multi Tool) – QcFire
• QFIL / QPST (Requires correct XML configuration)

How to Use Firehose Loader

1. Install Drivers: Ensure the latest Qualcomm HS-USB QDLoader 9008 driver is installed on your PC.
2. Open Flashing Tool: Launch your preferred professional tool (e.g., QFIL or UnlockTool).
3. Select Model: Search for “Lenovo Tab M10 Plus” or “TB125FU”.
4. Load Custom Loader: If the tool does not auto-detect the loader, manually select the prog_firehose_ddr_lenovo_tb125fu.elf file.
5. Connect Device: Boot your tablet into EDL Mode. (Note: This usually requires opening the back cover and shorting Test Points near the battery connector, or using an EDL cable).
6. Execute Repair: Click Flash or Factory Reset to begin the unbricking process.

⚠️ DISCLAIMER: Model Verification
There are multiple versions of the Lenovo Tab M10 Plus. This file is ONLY for the Qualcomm Snapdragon 680 versions (3rd Gen / TB125FU / TB128X). Do not use this on the MediaTek (Helio G80) versions, as it will not work and may cause errors.