Lenovo Xiaoxin Pad 2022 (TB128FU) Firehose Loader (Snapdragon 680) – Download

Revive your Chinese tablet. Download the official Lenovo Xiaoxin Pad 2022 (TB128FU) Firehose Loader. This specialized Snapdragon 680 programmer allows unbricking via EDL mode without authorized account access.

The Lenovo Xiaoxin Pad 2022 (Model: TB128FU / TB128XU) is the Chinese market version of the Tab M10 Plus (3rd Gen), powered by the Qualcomm Snapdragon 680 (SM6225) processor. Users often brick this device when attempting to flash Global Firmware over the original Chinese ZUI ROM without properly unlocking the region code. In this state, the tablet is only detected as Qualcomm HS-USB QDLoader 9008. To revive it, you need the specific Firehose Loader (Programmer) file tailored for the SM6225 platform.

File Information & Specs

Supported Tools

Standard free tools may not fully support this secure boot loader, especially if the region bit is mismatched. It is recommended to use updated professional service tools:

• UnlockTool (Recommended – Select ‘Lenovo Tab M10 Plus Gen 3’ or manual loader)
• QPST / QFIL (Requires correct XML configuration and patching)
• Chimera Tool
• UMT (Ultimate Multi Tool) – QcFire
• LMSA (Official Lenovo Tool – Use with caution on cross-flashed units)

How to Use Firehose Loader

1. Install Drivers: Ensure the latest Qualcomm HS-USB QDLoader 9008 driver is installed on your PC.
2. Open Flashing Tool: Launch your preferred professional tool (e.g., QFIL).
3. Load Custom Loader: If the tool does not auto-detect the loader, manually select the prog_firehose_ddr_tb128fu.elf file.
4. Connect Device: Boot your tablet into EDL Mode. (Note: For the Xiaoxin Pad, this usually requires opening the back cover and shorting the Test Points near the battery connector).
5. Execute Repair: Click Flash to reinstall the correct firmware (ZUI or Global depending on your goal) to unbrick the device.

⚠️ DISCLAIMER: Region Lock Warning
The Xiaoxin Pad 2022 is a Chinese variant. If you are unbricking after a failed Global ROM flash, it is highly recommended to flash back the original Chinese (CN) ZUI Firmware first to restore partition integrity. Flashing Global firmware directly via EDL without modifying region codes may result in a “System Destroyed” boot loop.